--- title: "Multi-Group Encoder-Decoder Networks to Fuse Heterogeneous Data for Next-Day Air Quality Prediction" authors: - "Yawen Zhang" - "Qin Lv" - "Duanfeng Gao" - "Si Shen" - "Robert Dick" - "Michael Hannigan" - "Qi Liu" doi: "10.24963/ijcai.2019/603" url: "https://ijcai.org/proceedings/2019/603" pdf: "https://ijcai.org/proceedings/2019/0603.pdf" venue: "Proceedings of the Twenty-Eighth International Joint Conference on Artificial Intelligence" year: 2019 pages: "4341-4347" track: "Main track" keywords: - "Machine Learning Applications: Environmental" - "Machine Learning: Deep Learning" - "Machine Learning: Time-series;Data Streams" --- # Multi-Group Encoder-Decoder Networks to Fuse Heterogeneous Data for Next-Day Air Quality Prediction Yawen Zhang, Qin Lv, Duanfeng Gao, Si Shen, Robert Dick, Michael Hannigan, Qi Liu *Proceedings of the Twenty-Eighth International Joint Conference on Artificial Intelligence*, pages 4341-4347. DOI: [10.24963/ijcai.2019/603](https://doi.org/10.24963/ijcai.2019/603) ## Abstract Accurate next-day air quality prediction is essential to enable warning and prevention measures for cities and individuals to cope with potential air pollution, such as vehicle restriction, factory shutdown, and limiting outdoor activities. The problem is challenging because air quality is affected by a diverse set of complex factors. There has been prior work on short-term (e.g., next 6 hours) prediction, however, there is limited research on modeling local weather influences or fusing heterogeneous data for next-day air quality prediction. This paper tackles this problem through three key contributions: (1) we leverage multi-source data, especially high-frequency grid-based weather data, to model air pollutant dynamics at station-level; (2) we add convolution operators on grid weather data to capture the impacts of various weather parameters on air pollutant variations; and (3) we automatically group (cross-domain) features based on their correlations, and propose multi-group Encoder-Decoder networks (MGED-Net) to effectively fuse multiple feature groups for next-day air quality prediction. The experiments with real-world data demonstrate the improved prediction performance of MGED-Net over state-of-the-art solutions (4.2% to 9.6% improvement in MAE and 9.2% to 16.4% improvement in RMSE). ## Full text ## 1 Introduction Air pollution is a major environmental concern in urban areas. Accurate next-day air quality prediction is of particular importance for cities and individuals to cope with air pollution in the real world. With next-day air pollution warning, cities and individuals can respond in advance, for example, restricting traffic, shutting down factories, and limiting outdoor activities. Despite extensive studies, next-day air quality prediction remains a challenging problem, due to high spatio-temporal variability and difficulties in long-term prediction (Figure 1). First, air quality is affected by complex factors and has high spatial and temporal variability. Usually, air quality monitoring stations are sparsely distributed in space. For example, there are 35 observation stations in Beijing, China, as shown in the top left subfigure in Figure 2. A recent study shows that the representation area of a station varies by both location and time, which can range from 0.25 to 16.25 km2 and is less than 3km2 for most stations [Shi et al., 2018]. Besides spatial variability, gradual and abrupt changes caused by various factors also induce temporal variability. Given the high spatial and temporal variability at station-level, leveraging heterogeneous data to learn those dynamics is a major challenge. Figure 1: Challenges of air quality prediction: (Left) high spatial and temporal variability and (Right) difficulties in long-term prediction. ![Image](https://ijcai.org/proceedings/2019/fulltext/603/image_000000_9ed4240da86fd6aef9a300be78fed06b2438afb5c621c7036216fccc66d67298.png) Second, predicting long-term air quality is particularly challenging. Previous studies have shown good prediction performance in the short term (e.g., next 6 hours), but the prediction error increases quickly for longer term prediction (e.g., next day), as shown in Figure 1. In particular, weather conditions play an important role in long-term prediction and it has been shown that severe haze events in Beijing are largely affected by weather conditions [Guo et al., 2014]. Although previous studies have included weather forecast as input, given the high variability of weather parameters, how to effectively represent weather data and capture their impacts on air pollution dynamics requires further exploration. When dealing with multi-source data, one key question is how to fuse them and leverage the complementary information from heterogeneous data. Currently, there exist only a few fusion models for such environmental problems. Multimodal deep learning proposes DNN-based fusion architectures to learn the joint space with multiple modalities [Ngiam et al., 2011]. In the multimodal setting, for example, video which inherently includes modalities like image, motion and sound, each modality is an integrated component and multiple modalities are fused for specific tasks. Motivated by multimodal data fusion, for air quality prediction, we consider two major questions: (1) how to identify multiple modalities or feature groups from multi-source data, which are not inherently multimodal; and (2) how to conduct time series prediction with the fusion architecture, since LSTM and seq2seq models are originally designed for single feature scenarios. To address the above-mentioned challenges, we propose multi-group Encoder-Decoder networks (MGED-Net), which fuses heterogeneous data to provide next-day air quality prediction. The main contributions of our work are: - To capture spatial and temporal variations of air pollution at station-level, we leverage multi-source data including air pollutants, weather, road networks and elevation. A major improvement over previous studies is the utilization of highfrequency grid-based weather data from an official source. - MGED-Net adopts a local convolution method to learn local weather impacts on air pollution dynamics. This feature representation is applied to both historical and forecast weather data and it enables more accurate air quality prediction. - MGED-Net uses a novel structure that combines distributed fusion and sequence learning. The distributed fusion is accomplished through a grouping strategy that generates multiple (cross-domain) feature groups, and sequence learning is based on Encoder-Decoder LSTM structure. - Extensive evaluations using real-world dataset demonstrate improved performance of MGED-net over state-of-theart models for next-day air quality prediction. ## 2 Data Sources and ProblemFormulation Our study focuses on predicting next-day PM2.5 1 . ## 2.1 Data Sources Based on extensive literature survey and our preliminary analysis, we have chosen the following datasets for our study. ## Air Quality Data We collected air quality data from all 35 stations in Beijing, China from January 1st, 2016 to January 31st, 2018. The stations are located in urban, suburban, near-traffic and other regions. Each station provides hourly reports of multiple air pollutants, including PM2.5, PM10, O3, NO2, CO, SO2. One major problem with the air quality dataset is missing data. The percentage of missing varies by air pollutant type (e.g., 14.7% for PM2.5 and 28.6% for PM10). We use linear interpolation to fill in missing data that occur within 3 hours. Continuous missing data which span longer than 3 hours are marked as NaN and not used in our study. ## Grid Weather Data Most previous studies use station-based weather data. However, there are only 17 weather monitoring stations in Beijing. Considering that some weather parameters can change significantly within a short distance, the representativeness of station-based weather data remains a serious concern. Besides, the highly nonuniform distribution of weather stations imposes further difficulties in representing weather impacts for all air quality monitoring stations. 1 PM2.5 refers to particulate matter (PM) with a diameter of less than 2.5 micrometers, which is a major concern for air quality. Therefore, we choose to use grid-based weather data, which are obtained from Global Data Assimilation System (GDAS), from National Center for Environmental Prediction (NCEP) Global Forecast System (GFS) 2 . This is a data assimilation product, where multi-source observations from stations, satellites, radars, etc. are incorporated with physical atmospheric model. The spatial resolution of the grid data is 0.25 ◦ and it has 117 grids covering Beijing area. The selected attributes of weather data include temperature, humidity, wind speed and wind direction (further decomposed into wind u and wind v). While GDAS provides 3D grid data, only one layer of height 50m (for temperature, humidity) and another layer of height 100m (for wind) are selected. To prepare historical weather data, a temporal linear interpolation is conducted to convert the 3-hourly raw data to hourly data. Besides obtaining historical weather data, we use a similar process to extract weather forecast data from the weather forecasts of GDAS. It should be noted that no historical weather data are included in weather forecast data. Therefore, historical and forecast weather data are separately generated by the official source and they both represent the real-world state-ofthe-art accuracy. ## Geo-Context Data We include road networks and elevation data to represent geo-context of stations. The road networks data is from OpenStreetMap (OSM), and elevation is Shuttle Radar Topography Mission (SRTM) data in 80m spatial resolution. The reason that we leverage geo-context data instead of Station ID to differentiate stations is because they explicitly describe geographic characteristics of different locations [Lin et al., 2017], and can be further applied to predict air quality at non-station locations where using Station ID is infeasible. ## 2.2 ProblemFormulation Let si be the target station, where multi-source data are gathered at or around si. Given a time window of length T, air quality features are specified as A = (a1 ,a2 , . . . ,aT ) ∈ RT×k , where ai ∈ Rk and k is the number of air pollutants observed. Historical weather features are specified as Wh Wh Wh = (wh wh wh 1 , wh wh wh 2 , . . . ,wh wh wh T ) ∈ RT×h×c , where wh wh wh i ∈ Rh×c , h is the number of weather parameters observed, and c is the size of grid selected. Both historical and forecast weather data are utilized around a station. Similarly, forecast weather features are specified as Wf Wf Wf = (wf wf wf T +1 , wf wf wf T+2 , . . . ,wf wf wf T+τ ) ∈ Rτ×h×c and τ is the length of forecasting time window. The geocontext features are specified as G ∈ Rm, where m is the number of geo-context features extracted. Time features are specified as T ∈ Rp , where p is the number of time features extracted from timestamps of data points. Problem: Given a station si and a target air pollutant a, historical time window T , we fuse multi-source data to predict asi in the next τ hours, denoted as ˆasi = (ˆaT+1 si , ˆaT+2 si , . . . , ˆaT+τ si ) ∈ Rτ . The purpose of the fusion model is to predict: where F is the fusion model. 2 https://www.ncdc.noaa.gov/data-access/model-data/ model-datasets/global-data-assimilation-system-gdas Figure 2: Architecture overview of MGED-Net: The model contains multiple Encoders and one Decoder, and both Encoder and Decoder are established using stacked LSTMs. Multiple feature groups are automatically determined and fed into different Encoders. A fusion unit is used to combine their hidden states into a joint representation, which is used as the initial state of the Decoder. After that, forecast features are fed into the Decoder, which predicts future air quality sequentially. ![Image](https://ijcai.org/proceedings/2019/fulltext/603/image_000001_1b401e6cbbfcd8509ee61f5c772f2b9e367f8f70a1e8387eee3e6f443711d986.png) ## 3 MGED-Net Model Description We first give an overview of the proposed MGED-Net model, then describe in detail each of the key components. ## 3.1 Overview of MGED-Net Figure 2 shows the overall architecture of MGED-Net. MGEDNet is intrinsically designed for multi-feature setups by first formulating the feature groups and then feeding them into the Encoder-Decoder structure. It effectively integrates complementary information from different data sources. It has three key components: feature representation, multi-group feature integration, and fusion architecture. ## 3.2 Feature Representation Given various types of data obtained from each station, the first component of MGED-Net aims to extract effective features at the station level. Specifically, we investigate how to represent various data types (e.g., grid, vector) at point-based stations. Air quality features. As mentioned earlier, each station monitors 6 types of air pollutants and reports their concentration levels hourly. All these air pollutant time series readings are directly included. Historical and forecast weather features. The grid-based weather data characterizes the local weather around a station. With grid data, we experiment with three different options to extract weather features as shown in Figure 3. The first option is a widely used approach that extracts the nearest grid element, i.e., the grid element that a station falls in. The problem with this approach is that only limited weather information is utilized. The second and third options use the idea of "local grids", i.e., k × k grids around a station, which have better spatial coverage around the stations. While option 2 computes the mean values of weather parameters, option 3 adopts a convolution layer on local grids to learn the kernels for various weather parameters. The convolution layer is applied to capture nonuniform impacts of local weather, for example, some kernels can represent the derivatives of wind field. Figure 3: Different grid data representations (AQ: air quality). ![Image](https://ijcai.org/proceedings/2019/fulltext/603/image_000002_5d8548416adddea7646763a8f0bbb87eae40a71e0c7508ae51bbb5b7e66ca7b3.png) Geo-context features. We convert road networks data into grid format by generating a fishnet with 10 km spatial resolution. The road density of each grid element is the number of roads passing through it. For elevation, to capture its variation, we compute the (mean, std) elevation of pixels within each 10 km2 grid element. Road density and elevation features of a station are extracted from the grid element it falls in. Time features. Given the timestamps of input data points, we extract 3 time features of the last timestamp: hour of day, day of week, and month. Summary. The extracted features fall into 5 categories: air quality, historical weather, forecast weather, geo-context, and time. For prediction, these features are converted to the range of [0, 1] using Min-Max Normalization, and the inverse of Min-Max Normalization is applied to recover real values. ## 3.3 Multi-Group Feature Integration Given multiple features as input, the purpose of multi-group feature integration is to formulate feature groups. Intuitively, features within the same domain (e.g., air quality vs. weather) can be grouped together, which is a strategy widely used in previous studies [Yi et al., 2018; Yuan et al., 2018]. We refer to this strategy as "domain groups" which leverages the domains of the features for grouping. However, this intuitive grouping strategy may not be optimal, especially given the fact that cross-domain features (i.e., features from different domain groups) may be more closely related. Figure 4 shows a correlation analysis of features from different domains. We can see that O3 (an air quality feature) Figure 4: Correlation matrix of multiple features. ![Image](https://ijcai.org/proceedings/2019/fulltext/603/image_000003_a18577ccedf31efbea3b5364aae7dc353599b42f0fa4c81054ca141a85788992.png) is more related to temperature and humidity (two weather features). As pointed out by [Wu et al., 2004], it is important to form "statistically independent" feature groups as a preliminary process for fusion, which minimize inter-group correlation and maximize intra-group correlation. Our goal is to divide the extracted features {f1, f2, . . . , fk} into D ∈ [1, k] feature groups. Since most features are either air quality or weather, for feature integration, we focus on air quality and weather features. We consider three different grouping strategies: By each, By domain, and By correlation. ## By Each With this strategy, each feature forms a group by itself, and fed into fusion model. The number of groups D equals k, which is the number of features. This strategy can be problematic when the number of features increases greatly and it relies completely on the fusion unit in learning feature interactions. ## By Domain Features can also be directly grouped by their domain categories (i.e., air quality and weather). Here, D = s, and s is the number of domain groups (D = 2 in our case). However, this grouping strategy could be harmful when non-related features are in the same group, especially when they are fed into networks with one set of parameters. ## By Correlation The intuitions this grouping strategy are: (1) intra-group correlation should be maximized, i.e., highly correlated features should be grouped together and fed into the same subnetwork; and (2) inter-group correlation should be minimized. This is a non-overlapping strategy and each feature only belongs to one group, which is different from previous approach [Yi et al., 2018] where the target feature is included in all groups. We design a clustering-based approach to group features. The correlation c(fp, fq) between features fp and fq is computed as their average Pearson correlation coefficients of all samples. The inter-group correlation is measured as the average pair-wise correlation of features from group Gi and Gj , and |Gi|, |Gj| are the number of features within each group: The intra-group correlation is measured as: where C(Gi) is the average pair-wise correlations of features within group Gi. The objective function used to detect feature groups is defined as: The objective function aims at minimizing the average ratio of inter-group correlation to intra-group correlation. Given a small D, the computational complexity is O(Dk ), and k is the number of features. We experiment with small D candidates {2, 3, 4} and pick the one that minimizes the function. ## 3.4 Fusion Architecture We use Encoder-Decoder LSTMmodel [Sutskever et al., 2014] as our base network for time series prediction. The EncoderDecoder structure can naturally separate historical and future time sequences, and LSTM is used for learning temporal dependencies in sequences. Previously, Encoder-Decoder LSTM model is widely used in single feature scenario. Given multiple features, the question is how to fuse them into Encoder-Decoder LSTM model to get accurate prediction. Using the proposed multi-group feature integration strategy, we obtain D feature groups denoted as {(x1d ,x2d , . . . ,xTd ) | d = 1, 2, . . . ,D}, where xd ∈ Rcd and cd is the number of features in the d-th group. We investigate three different fusion architectures. The last two approaches are based on Multiple Encoders structure and focus on Fusion Unit shown in Figure 2. Feature fusion. This fusion architecture directly concatenates all the feature to form a single sequence (x1 ,x2 , . . . ,xT ), where x ∈ Rk and k is the number of all features. This long vector is used as Encoder input. Encoder fusion. Given the feature groups generated, each group (x1d ,x2d , . . . ,xTd ), d ∈ [1,D] is used as the input of one Encoder, and their hidden states are further concatenated as (h1,h2, . . . ,hD) and used as the Decoder's initial state. Encoder fusion + Group interactions. The group interactions are important in learning complex relationships among features. Building upon Encoder fusion structure, we further model group interactions based on Tensor Fusion [Zadeh et al., 2017], an effective approach to learn inter-modality interactions. For our specific problem, if the target (i.e., PM2.5) is in group Gk with hidden state hk, the interaction between group Gk and Gi is computed as the outer product between hk and hi: By computing the interactions of feature group Gk with all other groups, their products are reshaped and concatenated as a sequence (hk1,hk2, . . . ,hkD) and a fully connected (FC) layer is applied to reduce dimension. The output of FC layer is used as the Decoder's initial state. ## 4 Experiments and Analysis ## 4.1 Implementation Details We process data from January 1st, 2016 to January 31st, 2018 and divide the samples by 8:1:1 into training, validation, and testing data. Training, validation and testing data do not overlap. The sequence lengths of Encoder and Decoder are set to 48 and 24. The size of local grids and convolution kernel are both set to 3×3. We conduct grid search to decide the optimal hyperparameter combination. We set the learning rate to 0.001, batch size to 128, and apply early stopping for model training. We use Adam to update parameters and Mean Squared Error (MSE) as loss function. We add dropout layer with rate 0.3 on Encoders and Decoder. All experiments are run on a machine with two NVIDIA GTX 1080 Ti GPUs. ## 4.2 EvaluationMetrics We compute the Root Mean Squared Error (RMSE) and Mean Absolute Error (MAE) for each future hour prediction, and average them into different hour ranges. Metrics unit: µg/m3 . In the following subsections, we first evaluate the performances of different approaches for the three key components in MGED-Net, and then compare MGED-Net with other models. ## 4.3 Performance of Feature Representation We compare three different options to represent grid weather data: nearest grid, local mean and local convolution. They are applied to both Encoder and Decoder 3 . Table 1: Grid data representations vs. prediction performance (MAE), E: Encoder, D: Decoder, D (-): no weather forecast | | 1-6h | 7-12h | 13-18h | 19-24h | |------------------------|--------|---------|----------|----------| | E (nearest) + D (-) | 15.57 | 24.17 | 33.51 | 42.01 | | E (mean) + D (-) | 15.11 | 21.92 | 31.42 | 39.13 | | E (conv) + D (-) | 15.41 | 22.09 | 28.49 | 36.17 | | E (conv) + D (nearest) | 15.76 | 18.98 | 22.71 | 28.73 | | E (conv) + D (mean) | 16.00 | 19.94 | 22.43 | 26.72 | | E (conv) + D (conv) | 14.36 | 18.86 | 20.27 | 22.35 | As shown in Table 1, weather forecast data we use makes significant improvement in long term prediction, especially after 6 hours. Among the three options for representing gridbased weather data, local convolution performs the best for 1 to 24 hours prediction, and local mean achieves better results than nearest grid in longer term. Previous studies using nearest weather station is similar to nearest grid approach. The results proves the effectiveness of applying local convolution to capture local weather impacts on air pollution variations. ## 4.4 Performance of Feature Grouping We compare different feature grouping strategies on multiple features 4 . Using By correlation strategy, the optimal number of groups is 4 and the generated groups are: Group 1 (PM2.5, PM10, CO, SO2, NO2), Group 2 (O3, humidity, temperature), As shown in Table 2, By correlation achieves the best performance for 1 to 24 hours predictions, and By domain performs the worst. Though By domain grouping is a widely used strategy, it actually ignores the cross-domain feature relationships. When non-related features are fed into one Encoder, it needs to learn both feature interactions and temporal dependencies and the burden is too heavy. In contrast, By correlation feeds Encoder with highly correlated features, and the results demonstrate the improvement with this grouping strategy. 3 By correlation grouping strategy and Encoder fusion are applied. 4 Local convolution and Encoder fusion are applied. Group 3 (wind u), Group 4 (wind v). The geo-context, time features are incorporated as separate groups. | | 1-6h | 7-12h | 13-18h | 19-24h | |----------------|--------|---------|----------|----------| | By each | 15.79 | 20.05 | 22.31 | 23.94 | | By domain | 16.20 | 20.73 | 23.03 | 26.95 | | By correlation | 14.36 | 18.86 | 20.27 | 22.35 | Table 2: Feature grouping strategy vs. prediction performance (MAE) ## 4.5 Performance of Fusion Architectures We compare three fusion architectures: Feature fusion, Encoder fusion, and Encoder fusion + Group interactions (GI). Table 3: Fusion architecture vs. prediction performance (MAE) | | 1-6h | 7-12h | 13-18h | 19-24h | |---------------------|--------|---------|----------|----------| | Feature fusion | 18.07 | 21.02 | 22.99 | 26.17 | | Encoder fusion | 14.36 | 18.86 | 20.27 | 22.35 | | Encoder fusion + GI | 13.44 | 18.05 | 20.95 | 21.91 | Table 3 shows the comparison results, Encoder fusion and Encoder fusion + GI (Group interactions) achieve much better performance than Feature fusion. Feature fusion is an intuitive way to deal with multiple features. However, it can be problematic due to the facts that: 1) feature correlations are weakly captured by the training weights of an Encoder [Ren et al., 2016], and 2) the prediction performance will degrade rapidly as input length increases [Cho et al., 2014]. Encoder fusion is an effective way to learn the joint representation of multiple Encoders. After adding inter-group interactions, the prediction performance is further improved. ## 4.6 Comparison of FusionModels Finally, we compare our MGED-Net model with five different models including baseline and state-of-the-art models. Here, we present the best result for each model by experimenting with different parameter settings. - Naive approach: Using current hour to predict all future hours, no prediction model applied. - LSTM: Using historical 48 hours to predict the future. - seq2seq: Stacked LSTMs in both Encoder and Decoder, and historical 48 hours for future predictions. - GeoMAN [Liang et al., 2018]: A Feature fusion architecture based on Encoder-Decoder structure, and employs multi-level attentions to learn feature importances. - DeepAir [Yi et al., 2018]: A distributed fusion architecture that fuses multiple FusionNets based on parametricmatrix-based strategy. Table 4: Performance comparisons of different models. | | 1-6h - MAE | 1-6h - RMSE | 7-12h - MAE | 7-12h - RMSE | 13-18h - MAE | 13-18h - RMSE | 19-24h - MAE | 19-24h - RMSE | |----------------------------------------|--------------|---------------|---------------|----------------|----------------|-----------------|----------------|-----------------| | Naive approach | 14.87 | 26.33 | 26.00 | 43.16 | 32.21 | 50.70 | 35.45 | 54.79 | | LSTM | 14.17 | 20.91 | 25.88 | 33.83 | 32.67 | 40.23 | 37.03 | 44.08 | | seq2seq | 14.13 | 21.39 | 23.99 | 32.59 | 30.14 | 38.55 | 33.61 | 41.89 | | DeepAir (6 hours) [Yi et al., 2018] | 19.66 | 25.81 | 23.53 | 29.82 | 28.80 | 36.26 | 28.03 | 35.12 | | DeepAir (48 hours) [Yi et al., 2018] | 19.18 | 25.15 | 23.13 | 29.64 | 25.20 | 31.88 | 28.43 | 35.37 | | GeoMAN (6 hours) [Liang et al., 2018] | 13.92 | 19.04 | 19.28 | 25.14 | 23.48 | 30.22 | 28.94 | 36.77 | | GeoMAN (48 hours) [Liang et al., 2018] | 14.03 | 19.10 | 19.42 | 25.06 | 22.95 | 29.31 | 24.23 | 32.14 | | MGED-Net (w/o Group interactions) | 14.36 | 20.68 | 18.86 | 26.63 | 20.27 | 28.01 | 22.35 | 31.44 | | MGED-Net (w/ Group interactions) | 13.44 | 17.35 | 18.05 | 22.83 | 20.95 | 26.01 | 21.91 | 26.88 | Table 4 shows the prediction performance of different models. Among all models, MGED-Net (w/ Group interactions) has the best performance for 1 to 24 hours prediction. Compared with LSTM, seq2seq has better performance in longer hours which demonstrates the effectiveness of using EncoderDecoder LSTM as basic network. For DeepAir and GeoMAN models, in their original settings, they use historical 6 hours sequences as input. We experiment with different sequence lengths (i.e., 6 and 48 hours) for them. With longer historical sequences, GeoMAN achieves significant improvements in longer term prediction (i.e., after 12 hours), owing to learning temporal dependency with LSTM. In contrast, DeepAir has no component for sequence learning, the improvement with longer historical hours is not obvious. With longer historical sequences, GeoMAN works much better than DeepAir. We also notice that DeepAir perform worse in short term which may due to By domain grouping applied as well as its fusion strategy. Compared with GeoMAN, MGED-Net with Group interactions achieves 4.2% to 9.6% improvement in MAE as well as 9.2% to 16.4% improvement in RMSE. The major problem of GeoMAN is the feature interactions are not well modeled with its Feature fusion architecture. ## 5 RelatedWork ## Air Quality Prediction Recent progress in air quality prediction can be divided into two categories. The first category is about data source, which explores a variety of data that can be potentially leveraged to improve prediction performance. In recent studies, weather forecast data [Liang et al., 2018; Yi et al., 2018] and geocontext data [Lin et al., 2017] are included and proved to be effective. The other category is about prediction model. Given multi-source data, how to fuse them to provide accurate and robust predictions is still a challenging problem. Previous models like Multi-Kernel Learning [Zheng et al., 2015] fuse different data sources by separating them into spatial and temporal views, while more recent DNN-based models focus more on designing the fusion architecture [Liang et al., 2018; Yi et al., 2018] to fuse multi-source data. ## Data Fusion The purpose of data fusion is to leverage the complementary information from multi-source data [Ngiam et al., 2011; Liu et al., 2018]. Both traditional and DNN-based approaches have been explored [Zheng, 2015; Alam et al., 2017]. Multimodal learning has been a growing trend in machine learning field and is closely related to our work. A variety of DNNbased fusion models have been proposed. There are two main strategies: early fusion and late fusion [Nojavanasghari et al., 2016]. Early fusion (also called Feature Fusion) simply concatenates all the features into a long vector as model input [Liang et al., 2018], while late fusion leverages information learned from each modality and fuses them with specific approaches [Ngiam et al., 2011]. For late fusion, different methods have been proposed. For example, LSTM fusion concatenates all hidden states from LSTM [Long et al., 2018], and DNN-based fusion combines multimodal predictions with fully connected layers [Nojavanasghari et al., 2016; Li et al., 2017]. For air quality prediction, an attention-based feature fusion model was proposed [Liang et al., 2018], which leverages an Encoder-Decoder structure for sequence learning and multi-level attentions to learn feature importances. And a parametric-matrix-based fusion model has been proposed, which works as a form of ensemble model by learning weights for predictions from different components [Yi et al., 2018]. Compared with existing fusion models for air quality prediction, MGED-Net model takes advantages of both distributed structure and sequence learning. As a result, both complex feature interactions and temporal dependencies can be learned to improve prediction accuracy. ## 6 Conclusions and FutureWork In this work, we propose multi-group Encoder-Decoder networks (MGED-Net) for next-day air quality prediction. MGEDNet consists of 3 key components: convolution-based grid data representation, correlation-based feature grouping, and multigroup fusion with group interactions. Experimental results on real-world dataset demonstrate the effectiveness of MGEDNet for next-day air quality prediction. The proposed model can also be potentially used in other multi-source data problems. For future work, we would like to investigate more on multi-feature relationships and fusion models which can adjust its fusion structure (i.e., different groups) with time-variant characteristics such as weather variations. ## Acknowledgments This work was supported in part by the US National Science Foundation (NSF) through grant CCF 1442971. ## References 1. [Alam et al., 2017] Furqan Alam, Rashid Mehmood, Iyad Katib, Nasser N Albogami, and Aiiad Albeshri. Data fusion and iot for smart ubiquitous environments: A survey. IEEE Access, 5:9533-9554, 2017. 2. [Cho et al., 2014] Kyunghyun Cho, Bart Van Merriënboer, Dzmitry Bahdanau, and Yoshua Bengio. On the properties of neural machine translation: Encoder-decoder approaches. arXiv preprint arXiv:1409.1259, 2014. 3. [Guo et al., 2014] Song Guo, Min Hu, Misti L. Zamora, Ji- anfei Peng, Dongjie Shang, Jing Zheng, Zhuofei Du, Zhijun Wu, Min Shao, Limin Zeng, Mario J. Molina, and Renyi Zhang. Elucidating severe urban haze formation in china. Proceedings of the National Academy of Sciences, 111(49):17373-17378, 2014. 4. [Li et al., 2017] Xiang Li, Ling Peng, Xiaojing Yao, Shao- long Cui, Yuan Hu, Chengzeng You, and Tianhe Chi. Long short-term memory neural network for air pollutant concen- tration predictions: Method development and evaluation. Environmental Pollution, 231:997 -1004, 2017. 5. [Liang et al., 2018] Yuxuan Liang, Songyu Ke, Junbo Zhang, Xiuwen Yi, and Yu Zheng. Geoman: Multi-level attention networks for geo-sensory time series prediction. In Inter- national Joint Conference on Artificial Intelligence, pages 3428-3434, 2018. 6. [Lin et al., 2017] Yijun Lin, Yao-Yi Chiang, Fan Pan, Di- mitrios Stripelis, Jose Luis Ambite, Sandrah P. Eckel, and Rima Habre. Mining public datasets for modeling intra- city pm2.5 concentrations at a fine spatial resolution. In Proceedings of the 25th ACM SIGSPATIAL International Conference on Advances in Geographic Information Sys- tems, SIGSPATIAL '17, pages 25:1-25:10, New York, NY, USA, 2017. ACM. 7. [Liu et al., 2018] Zhun Liu, Ying Shen, Varun Bharadhwaj Lakshminarasimhan, Paul Pu Liang, AmirAli Bagher Za- deh, and Louis-Philippe Morency. Efficient low-rank mul- timodal fusion with modality-specific factors. In Proceed- ings of the 56th Annual Meeting of the Association for Computational Linguistics (Volume 1: Long Papers), pages 2247-2256. Association for Computational Linguistics, 2018. 8. [Long et al., 2018] Xiang Long, Chuang Gan, Gerard Melo, Xiao Liu, Yandong Li, Fu Li, and Shilei Wen. Multimodal keyless attention fusion for video classification. In The Thirty-Second AAAI Conference on Artificial Intelligence, 2018. 9. [Ngiam et al., 2011] Jiquan Ngiam, Aditya Khosla, Mingyu Kim, Juhan Nam, Honglak Lee, and Andrew Y. Ng. Mul- timodal deep learning. In Proceedings of the 28th Interna- tional Conference on International Conference on Machine Learning, ICML'11, pages 689-696, USA, 2011. Omni- press. 10. [Nojavanasghari et al., 2016] Behnaz Nojavanasghari, Deepak Gopinath, Jayanth Koushik, Tadas Baltrušaitis, and Louis-Philippe Morency. Deep multimodal fusion for persuasiveness prediction. In Proceedings of the 18th ACM International Conference on Multimodal Interaction, pages 284-288. ACM, 2016. 11. [Ren et al., 2016] Jimmy Ren, Yongtao Hu, Yu-Wing Tai, Chuan Wang, Li Xu, Wenxiu Sun, and Qiong Yan. Look, listen and learn?a multimodal lstm for speaker identifica- tion. In The Thirtieth AAAI Conference on Artificial Intelli- gence, 2016. 12. [Shi et al., 2018] Xiaoqin Shi, Chuanfeng Zhao, Jonathan H. Jiang, Chunying Wang, Xin Yang, and Yuk L. Yung. Spatial representativeness of pm2.5 concentrations obtained using observations from network stations. Journal of Geophysical Research: Atmospheres, 123(6):3145-3158, 2018. 13. [Sutskever et al., 2014] Ilya Sutskever, Oriol Vinyals, and Quoc V Le. Sequence to sequence learning with neural networks. In Advances in Neural Information Processing Systems, pages 3104-3112, 2014. 14. [Wu et al., 2004] Yi Wu, Edward Y. Chang, Kevin Chen- Chuan Chang, and John R. Smith. Optimal multimodal fusion for multimedia data analysis. In Proceedings of the 12th Annual ACM International Conference on Multimedia, MULTIMEDIA '04, pages 572-579, New York, NY, USA, 2004. ACM. 15. [Yi et al., 2018] Xiuwen Yi, Junbo Zhang, Zhaoyuan Wang, Tianrui Li, and Yu Zheng. Deep distributed fusion network for air quality prediction. In Proceedings of the 24th ACM SIGKDD International Conference on Knowledge Discov- ery, KDD '18, pages 965-973, New York, NY, USA, 2018. ACM. 16. [Yuan et al., 2018] Zhuoning Yuan, Xun Zhou, and Tianbao Yang. Hetero-convlstm: A deep learning approach to traffic accident prediction on heterogeneous spatio-temporal data. In Proceedings of the 24th ACM SIGKDD International Conference on Knowledge Discovery & Data Mining, pages 984-992. ACM, 2018. 17. [Zadeh et al., 2017] Amir Zadeh, Minghai Chen, Soujanya Poria, Erik Cambria, and Louis-Philippe Morency. Tensor fusion network for multimodal sentiment analysis. arXiv preprint arXiv:1707.07250, 2017. 18. [Zheng et al., 2015] Yu Zheng, Xiuwen Yi, Ming Li, Ruiyuan Li, Zhangqing Shan, Eric Chang, and Tianrui Li. Forecast- ing fine-grained air quality based on big data. In Proceed- ings of the 21th ACM SIGKDD International Conference on Knowledge Discovery and Data Mining, KDD '15, pages 2267-2276, New York, NY, USA, 2015. ACM. 19. [Zheng, 2015] Yu Zheng. Methodologies for cross-domain data fusion: An overview. IEEE Transactions on Big Data, 1(1):16-34, 2015.